LEDCO LED Strip – SL180 Single Color 5 Meters 14.4W/MT 24V 180 LEDs/MT IP65

€ 128.10 Original price was: € 128,10.€ 84.00Current price is: € 84,00.

LEDCO flexible LED strip for linear lighting with monochromatic LED, 5 meter coil. Can be sectioned at pre-set intervals every 3.3 cm. In the IP65 versions we use a protective coating in thermo-dissipating silicone elastomer with a diffusing finish (extends the life of the outdoor strip while keeping it transparent and soft over time). 3M 300LSE adhesive tape on the back, high adhesive power even on powder-coated profiles. The double cable header allows for quicker series connection. The high density of the LEDs (180 chips per meter) allows for homogeneous lighting on all surfaces. For thermal dissipation, the use of an aluminum profile with an adequate section is strongly recommended. Chip with CRI 90+ and 3 Step MacAdam.
IMPORTANT: the power supply must be the same voltage as the Strip (if the strip is 24V the power supply must also be 24V regardless of the power in W).
For any calculation you can contact us privately and we will provide you with personalized advice free of charge. The power supplies must have a power 20% higher than the wattage of the LED strip. To choose the right power supply according to your needs, you need to do a simple calculation: Multiply the length of the strip in meters x the power per metre, example of calculation for a 2.5 m long strip with a power of 14.4W per metre. meter: 2.5×14.4= 36W therefore a 50W power supply is required.
HOW TO INSTALL: Simply, the LED strip is supplied with a 3M adhesive tape placed on the back of the strip, which allows for quick fixing so that it can also be glued onto aluminum profiles.
We always recommend the purchase of aluminum profiles for correct heat dissipation of the LED strip, this will lead to a long life of the LED strip avoiding overheating which over time would lead to a decrease in light power and a shorter life of the strip.